Setting Up Your Mu100R; What You'll Need; Making The Connections - Yamaha MU100R Owner's Manual

Setting Up Your MU100R

Setting Up Your MU100R
In this section, you'll learn how to:
Connect the MU100R in the most basic setup — with a MIDI keyboard
and an external amplifier/speaker system.
Other setup examples are covered in later sections; for example, setting up
for use with a computer is on page 19. Once you've set up the MU100R, we
urge you to play the Demo song (page 15) and hear what the instrument is
capable of.

What You'll Need

The MU100R and the included PA-5B power adaptor.
A MIDI keyboard, electronic piano, or any instrument that can output
MIDI data.
An amplifier/speaker system, preferably stereo. Alternately, you can use
a set of stereo headphones.
Audio connecting cables.
A MIDI cable.

Making the Connections

CAUTION!
Before making any connections, turn all related equipment off, and make sure the
MU100R power adaptor is not connected to an electrical outlet.
Operation
1 Connect the MIDI cable.
Connect the MIDI OUT terminal of the MIDI keyboard to the
MIDI IN-A of the MU100R (as shown in the illustration).
2 Connect the audio cables.
Connect the R and L/MONO OUTPUT jacks of the MU100R to
the appropriate inputs on the amplifier speaker system (as shown
in the illustration).
•If the amplifier has only one input, use the L/MONO jack on the
MU100R. If you are using stereo headphones, connect them to
the front panel PHONES jack.
12
Guided Tour