2N Indoor Talk User Manual page 55

Possible Perform-
actions ance
Incoming
call receiv-
ing
End of Call
End of call
Target de-
vice un-
Short
locking
press
Long press
Mute call
Device Control
Connection with the other device has been established, a call is in pro-
gress.
NOTE
The call receiving button flashes (green for 2N IP inter-
com/indoor answering unit incoming calls and blue for
third party equipment incoming calls).
The outgoing call is cancelled./The incoming call is rejected./The active
call is interrupted.
The active call is interrupted.
A short press of the unlock button sends a code (refer to
web configuration).
If no unlock code is set, the default unlock code is sent to the target
device.
Door unlocking is signaled by a tone and green flash of the lock button.
After unlocking, automatic call ending can be set in the
web configuration .
A long press of the unlock button sends a code (refer to
web configuration).
If no unlock code is set, the default unlock code is sent to the target
device.
Door unlocking is signaled by a tone and green flash of the lock button.
After unlocking, automatic call ending can be set in the
web configuration .
2N Indoor Talk does not transmit audio to the called device.
The microphone buttons is flashing yellow.
The action reperformance cancels muting.
55
Action result
Device (p. 28)
Unlocking (p. 35)
Device (p. 28)
Unlocking (p. 35)