3.
Select the type of call:
• "SIP" for calls via SIP
• "rava" for calls with Creston
• "vms" for calls with Axis Camera Station
• "device" for calls with a local 2N device
4.
Enter the calling destination address into the destination field to which the call is to be routed. Complete
the target IP address or SIP URI in the format " user_name@host" (e.g.: "johana@2.255.4.255" or
"johana@calls.2N.com"). For local calls, fill in the called 2N device ID as specified in the
34)
tab in the called device web interface.
5.
Edit the following:
• starting a call with the contact by a long/short press of the call button
• a virtual number to start a call by entering the number via your numerical keypad
• basic information
6.
Make sure that the call transmitting service is enabled on the called 2N device to make a successful call.
Brief Guidelines
21
Local Calls (p.