Table of Contents
Advertisement
NOTE
The device does not need the current date and time values for its basic function. The
current date and time values are necessary for a proper function of the time profiles and
correct event times in some lists (Syslog, Entered cards, Log downloaded via HTTP API,
etc.).
CAUTION
It is recommended that the
mum accuracy and reliability. The device time error can be up to ±2 minutes per month
under normal operation conditions.
Current Time
Use time from Internet – Enable the NTP server use for device time synchronization.
Synchronize with Browser – click the button to synchronize the device time with your current PC time value.
Time zone
Automatic Detection – define whether the time zone shall be detected automatically from My2N. In case
automatic detection is disabled, the Manual selection parameter is Used (manually selected time zone or
Own rule).
Detected Time Zone Display – the automatically found time zone. In case the function is unavailable or
disabled, N/A is displayed.
Manual Selection – set the time zone for your installation site. to define time shifts and summer/winter time
transitions.
Custom Rule – if the device is installed on a site that it not included in the Time Zone parameter, set the
time zone rule manually. The rule is applied only if the Time Zone parameter is set to Manual.
NTP Server
NTP Server Address – set the IP address/domain name of the NTP server used for the device internal time
synchronization. The server IP address and domain name cannot be set if
disabled.
NTP Time Status – display the state of the last local time synchronization attempt via NTP: Unsynchronized.
Synchronized, Error.
Functions
The menu provides a list of published beta functions designed for user testing.
The list includes:
• function name,
• function status (started/stopped),
• event that starts/stops the function.
The function will not be started/stopped until the device is restarted. The status change request can be
cancelled using the Interrupt action before the device is restarted.
Configuration
Use time from Internet (p. 0
40
)
function is enabled for a maxi-
Use Time from Internet (p. 0
)
is
Advertisement
Table of Contents
