2N Indoor Talk User Manual page 30

Start Call with Long Press – a phone call to device B will be set up after a long press of the call button.
Alarm Call
Start Call with Doorbell Button Press – a phone call to this device will be set up after the alarm call button
is pressed. Set the doorbell alarm call function in HW >
Unlock Button Function
Short Press Code – is a code assigned to a short press of the unlocking button A. It used for remote
unlocking of the entrance door, for example. Make sure that the code includes at least two door unlocking
characters via the intercom keypad and at least one door unlocking DTMF character via a phone. Four
characters at least are recommended.
Long Press Code – is a code assigned to a long press of the unlocking button B. It used for remote
unlocking of the entrance door, for example. Make sure that the code includes at least two door unlocking
characters via the intercom keypad and at least one door unlocking DTMF character via a phone. Four
characters at least are recommended.
Time Profiles
Assign a Time profile to the DND mode to define when the selected function is available and when it is not.
Each time profile defines the function availability based on a week calendar. Just set From-To and/or
specify the weekdays for availability. The 2N IP answering units help you create up to 20 time profiles
(depending on the IP model). The selected function can be assigned any time profile created in Calls >
General settings (p. 31)
Basic Settings
Profile name – enter a profile name. This parameter is optional and helps you find items in the profile list
more easily.
Profile Time Sheet
This block helps you set an active time profile within a week. A profile is active when the current time falls
into the set intervals.
If a day is marked as holiday (refer to
the day in a week.
NOTE
• You can set any count of time intervals per day: 8:00–12:00, 13:00–17:00, 18:00–20:00,
for example.
• To make a profile active the whole day, add an interval covering one whole day, i.e.
00:00–24:00
Holidays
Here select the bank holidays (including Sundays). You can assign them different time intervals than to
working days in their time profiles (refer to
You can set holidays for the coming 10 years (click the year number at the top of the screen to select a
year). The screen displays a calendar for the whole year. A calendar is displayed for you to select/unselect
a holiday. Fixed (annual) holidays are marked green. Variable holidays (valid for the particular year only) are
blue. Click a date once to select a fixed holiday, click twice to select a variable holiday and click for the third
time to remove the holiday from the holiday list.
> Incoming calls.
Holidays (p.
Time Profiles (p.
Configuration
Digital inputs (p. 38)
30)), the last table row (Holiday) is applied regardless of
30)).
30
> Doorbell button.