Table of Contents
Advertisement
Button
Type of press
Short press
Long press
Short press
Long press
—
—
—
Short press
Long press
Simultaneous
press of the
two buttons for
and
3 seconds
Device Control
Call to device A (see the note below for setting details).
Call to device B (see the note below for setting details).
Unlocking of device A lock (see the note below for setting details).
Sending of the HTTP command (if set).
Rejection of an incoming call or termination of an active/outgoing
call.
Volume setting by one level down. When the minimum volume is
reached, the button starts flashing.
Upon a volume level change, the device plays the new volume
level sound.
The volume level is the same for all states and sounds.
Volume setting by one level up. When the maximum volume is
reached, the button starts flashing.
Upon a volume level change, the device plays the new volume
level sound.
The volume level is the same for all states and sounds.
Activation of the Do Not Disturb mode and the button turns yel-
low. The DND mode can be disabled by a short press of
The
Do Not Disturb (p. 57)
turns white. The DND mode is cancelled when the set timeout
expires. If the DND mode with timeout (set in Calls >
> Incoming calls in the web configuration) has the OFF value, a
long press of the buttons generates no action.
The device gets into
Ringtone Setting Menu (p.
49
Generated action
mode is activated and the button
.
Calls (p. 31)
50).
Advertisement
Table of Contents
