Table of Contents
Advertisement
Vertiv™ Liebert® APM Plus User Manual
No.
5
5.2 Navigating through the Liebert APM Plus Touchscreen Control
Panel
The Liebert® APM Plus Touchscreen Control Panel is active whenever the UPS has input power. The TOUCHSCREEN on the
front of the UPS permits:
•
Logging in to the system-- Log In to the Liebert APM Plus Touchscreen Control Panel
•
Customizing the user interface--Customizing the Display
•
Checking the status of the UPS and its external batteries, including all measured parameters, events and alarms-
-Viewing UPS Status and Viewing UPS Component Status
•
Silencing alarms--Silence an Alarm
•
Turning the UPS On--Inverter On
•
Turning the UPS Off--Inverter Off
•
Resetting faults--Reset Fault
•
Enabling Energy Saving Mode--Energy Saving Mode Activation
The Liebert APM Plus Touchscreen Control Panel's display default view in two panels: One-line animated mimic and UNIT
STATUS. The appearance can be changed to multiple panels that show other data. Customizing the appearance is detailed in
Customizing the Display.
5.2.1 Access Level Log-In
The Liebert APM Plus Touchscreen Control Panel provides security by limiting the authority to change how the UPS
operates. Each of the four access levels offers different authority:
•
Observer--Viewing permission only; can choose graphic or text display; no PIN required
•
Operator--Permission to start the UPS, shut the system down, reset faults and enable or disable Eco Mode
operation; PIN required
•
Administrator--All functions of Operator and the permission to change PINs for Operator and Administrator level;
PIN required
•
Service--All functions of Administrator and the permission to alter system configuration, choose serial
communication protocol, enable equalize battery charging and change Service PIN; PIN required.
Vertiv Tech Liebert Services sets PINs when setting up the UPS. These default PINs may be changed by those with
Administrator or Service access (see above).
Default PINs are:
•
Operator: 1234
•
Administrator: 2345
NOTE: Risk of unauthorized changes to operational settings can cause equipment damage. The default PIN numbers
should be changed immediately to prevent unauthorized personnel from changing UPS operation or even shutting
down the UPS. The PINs for Operator and Administrator may be changed by logging in with either Administrator or
Service level access.
60
Description
UPS Status LED
Proprietary and Confidential ©2023 Vertiv Group Corp.
5 Operator Control and Display
Panel
Advertisement
Table of Contents
