Table of Contents
Advertisement
7. Configuration
8. "Device data" can view the real-time data of the connected device. At the same time,
the inverter can be remotely adjusted and controlled by "Control and Telecontrol".
Because the meter involves PT/CT ratio and other issues, after adding the meter
information in Interface config, you must set the strain ratio parameters in the Device data
according to the sequence in below figure. For example, if the PT ratio is 10kv to 100v,
100 needs to be delivered.
.18.
Advertisement
Table of Contents
Need help?
Do you have a question about the S3-Logger and is the answer not in the manual?
Questions and answers