Aiphone IXG Series Quick Start Programming Manual page 14

Station Partitioning
Stations placed in different units are not automatically configured to call one another. These settings control which
stations can see and communicate with each other.
System Information - Station List
To configure which stations are in an answering station's address book, expand System Information from the
side menu and select Station List.
A row of all of stations will be listed, as well as a column for each. Find the cross section where the desired
stations meet and place a check mark in the drop down menu to place those stations in each others address
book. To take them out of the address book, make that cell blank. The door release button can be enabled when
adding the specified station or mobile app to a station's address book. By default, when adding a station with the
check mark it will show the door release button.
Call Settings - Called Stations (Door/Sub Stations)
Navigate to Call Settings, Called Stations (Door/Sub Stations) from the side menu.
The page will display a row of all stations along the top, as well as a list of stations to the left. To configure the
stations a door will call, scroll right to find the cell where the calling door station and the master station intersect.
Use the drop-down menu to add a U to add that station to the door's call list. Remove a U to prevent the door from
calling that master.
The door stations can only be set to ring one unit of mobile apps per group. To select the desired unit's mobile
apps, scroll to the right and click
Upload Settings to Stations
The final step is to upload these setting changes to the IXG stations. To upload the settings to each station, select
Connection on the top menu and click Upload Settings. Find more information on page 10.
14 | IXG Quick Start Programming Guide
. Place a check mark next to the desired mobile app unit and click
Select
If a mobile app
needs to interact
with an IXG-DM7
entrance station
that is using both
relays, set the
value to display 2
in order to have
both door release
sliders show up on
the mobile app.
.
OK