LUNA2000-(7, 14, 21)-S1
User Manual
Procedure
Step 1 Crimp an OT terminal.
● Avoid scratching the core wire when stripping a cable.
● The cavity formed after the conductor crimp strip of the OT terminal is crimped
● Wrap the wire crimping area with heat shrink tubing or insulation tape. The
● Use a heat gun carefully to avoid heat damage to the equipment.
Figure 5-2 Crimping an OT terminal
(A) Core wire
(D) Heat gun
Step 2 Connect the ground point of the Energy Storage Control Unit to the external
ground point.
Issue 01 (2024-03-27)
NO TICE
must wrap the core wire completely. The core wire must make close contact
with the OT terminal.
heat shrink tubing is used as an example.
Copyright © Huawei Digital Power Technologies Co., Ltd.
(B) Insulation layer
(E) Hydraulic pliers
5 Electrical Connections
(C) Heat shrink tubing
60