LUNA2000-(7, 14, 21)-S1
User Manual
No.
5.2 Cable Hole on the Decorative Cover
The cable hole on the decorative cover is small. Route the cables through the
decorative cover before connecting the terminals.
5.3 Installing a PE Cable
Precautions
Ensure that the PE cable is securely connected. Otherwise, electric shocks may
occur.
Issue 01 (2024-03-27)
Cable
PE cable
NO TE
● The minimum cable cross-sectional area must meet local standards.
● The factors to be considered in cable selection include the rated current, cable type,
routing mode, ambient temperature, and maximum acceptable line loss.
● The length of the DC input power cables and signal cables between an ESS and the
inverter must be less than or equal to 20 m.
NO TICE
D ANGER
NO TE
It is recommended that silicone grease or paint be applied around the ground terminal
after the PE cable is connected.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Type
Recommended
Specifications
Single-core
● 10 mm
outdoor copper
cable
5 Electrical Connections
Source
Prepared
2
by the
customer
59