Installing The Ess - Huawei LUNA2000-7-S1 User Manual

LUNA2000-(7, 14, 21)-S1
User Manual
Note the polarities when installing batteries. Do not connect the positive and
negative poles of a battery or battery string together. Otherwise, the battery may
be short-circuited.
● Tighten the screws on copper bars or cables to the torque specified in this
● When installing batteries, do not place installation tools, metal parts, or
Before unpacking, storage, and transportation, ensure that the packing cases are
intact and the batteries are correctly placed according to the labels on the packing
cases. Do not place a battery upside down or vertically, lay it on one side, or tilt it.
Stack the batteries according to the stacking requirements on the packing cases.
Ensure that the batteries do not fall or get damaged. Otherwise, they will need to
be scrapped.
After unpacking batteries, place them in the required direction. Do not place a
battery upside down or vertically, lay it on one side, tilt it, or stack it. Ensure that
the batteries do not fall or get damaged. Otherwise, they will need to be scrapped.
Issue 01 (2024-03-27)
D ANGER
WARNING
document. Periodically confirm whether the screws are tightened, check for
rust, corrosion, or other foreign objects, and clean them up if any. Loose screw
connections will result in excessive voltage drops and batteries may catch fire
when the current is high.
sundries on the batteries. After the installation is complete, clean up the objects
on the batteries and the surrounding area.
WARNING
WARNING
Copyright © Huawei Digital Power Technologies Co., Ltd.
4

Installing the ESS

4 Installing the ESS
44