Simons Voss Technologies SmartCD.MP Quick Manual page 18

2. General safety instructions
Damage as a result of mechanical impact
This product contains electronic components that may be damaged by mechanical im-
pacts of any kind.
1. Avoid touching the electronics.
2. Avoid other mechanical influences on the electronics.
Operational malfunction due to radio interference
This product may be affected by electromagnetic or magnetic interference.
Do not mount or place the product directly next to devices that could cause electro-

magnetic or magnetic interference (switching power supplies!).
Communication interference due to metallic surfaces
This product communicates wirelessly. Metallic surfaces can greatly reduce the range of
the product.
Do not mount or place the product on or near metallic surfaces.

NOTE
Intended use
SimonsVoss-products are designed exclusively for opening and closing
doors and similar objects.

Qualifications required
The installation and commissioning requires specialized knowledge.
Only trained personnel may install and commission the product.

18 / 88
Do not use SimonsVoss products for any other purposes.
SmartCD.MP SI.SMARTCD
EN