Control Data Cyber 170 State Hardware Reference Manual page 63

Deadstart DisplayslControls
Table 3-1. Deadstart Options Display
Option Description
S
S e l e c t s a s h o r t d e a d s t a r t sequence using t h e d e a d s t a r t program
i d e n t i f i e d a t t h e bottom of t h e d i s p l a y .
Upon completion of the
d e a d s t a r t sequence
a d i s p l a y f o r l o a d i n g system software a p p e a r s .
M Causes t h e d e a d s t a r t d i s p l a y t o appear on t h e s c r e e n .
Table 3-2.
Deadstart Display Operator E n t r i e s and Functions
Operator Entry Function
YYYYYY
Enters a s i n g l e word i n t h e d e a d s t a r t program a t xx t o
a new
value yyyyyy ( o c t a l ) .
XX+YYYYYY
Changes words i n t h e d e a d s t a r t program i n sequence s t a r t i n g
a t xx.
S
S e l e c t s a s h o r t d e a d s t a r t sequence.
L
S e l e c t s
a long d e a d s t a r t sequence.
Brings up a d i s p l a y t h a t l i s t s and e x p l a i n s a l l a v a i l a b l e
commands.
Refer t o t h e Hardware Operator's Guide f o r
d e t a i l e d information about t h e s e commands.