Recalling Automixes; Swapping The Current Automix - Yamaha 03D Owner's Manual

Recalling Automixes

Automixes are recalled on the Memory page. You can recall any one of the four auto-
mixes. When an automix is recalled, the contents of the current automix are replaced
by the contents of the automix being recalled. You may want to store the current auto-
mix before recalling an automix. See Storing Automixes on page 202 for more informa-
tion.
1. Use the [AUTOMIX] button to locate the Memory page.
2. Use the PARAMETER wheel to scroll through the list of automixes.
If you are using a mouse, position the mouse cursor over the parameter box, press and
hold the left mouse button, and then drag the mouse.
The number, title, size, time base, and start time for each automix is displayed. Automix
memories that do not contain data have the title No Data!
3. Use the cursor button to select the RECALL switch, and then press the
[ENTER] button.
If you are using a mouse, simply click the RECALL switch.
The contents of the selected automix are recalled and become the current automix.
When an automix is recalled, and the undo function is on, the previous current auto-
mix is copied to the undo buffer. If there's not enough memory available to recall an
automix and have the current automix copied to the undo buffer, the current automix
and automix memory can simply be swapped. See Swapping the Current Automix on
page 204 for more information.
203

Recalling Automixes

03D—Owner's Manual