Swapping The Current Automix - Yamaha 03D Owner's Manual

204
Chapter 16—Automix

Swapping the Current Automix

When an automix is recalled, and the undo function is on, the previous current auto-
mix is copied to the undo buffer. If there's not enough memory available to recall an
automix and have the current automix copied to the undo buffer, the current automix
and automix memory can simply be swapped. Swap can also be used when you attempt
to store or recall an automix that is too large for the available memory.
1. Use the [AUTOMIX] button to locate the Memory page.
2. Use the PARAMETER wheel to scroll through the list of automixes.
If you are using a mouse, position the mouse cursor over the parameter box, press and
hold the left mouse button, and then drag the mouse.
The number, title, size, time base, and start time for each automix is displayed. Automix
memories that do not contain data have the title No Data!
3. Use the cursor button to select the SWAP FOR CURRENT switch.
4. Press the [ENTER] button.
If you are using a mouse, simply click the SWAP FOR CURRENT switch.
A confirmation dialog box appears.
5. Use the cursor buttons to select OK, and then press the [ENTER] button.
If you are using a mouse, simply click OK.
The current automix and automix memory are swapped without affecting the undo
buffer.
03D—Owner's Manual