Yamaha 03D Owner's Manual page 236

236
Chapter 19—MIDI
Control Change messages. Rx determines whether or not the 03D receives Control
Change messages. OMNI determines whether or not the 03D receives Control Change
messages on all 16 MIDI Channels. When OMNI is on, Control Change messages are
received regardless of the MIDI CHANNEL Rx parameter settings. ECHO determines
whether or not Control Change messages received on the specified MIDI Channel (Rx
CH) are echoed to the MIDI OUT.
PARAMETER CHANGE —Parameter Change System Exclusive messages are used to
control 03D parameters in real time. The three switches in this group are as follows. Tx
determines whether or not the 03D transmits Parameter Change System Exclusive mes-
sages. Rx determines whether or not the 03D receives Parameter Change System Exclu-
sive messages. ECHO determines whether or not Parameter Change System Exclusive
messages received on the specified MIDI Channel (Rx CH) are echoed to the MIDI
OUT.
BULK —This switch determines whether or not the 03D receives MIDI Bulk Request
messages and MIDI Bulk Dump data.
FADER START (NOTE ON) —When Fader Start is set to ON, a MIDI Note On mes-
sage is transmitted when the fader of an odd-numbered channel is raised from infinity
(oo). This can be used in conjunction with a "MIDI to trigger" interface box to auto-
matically start CD players, tape decks, etc. This function is intended for use with chan-
nels configured as a stereo pair. That's why only the odd-numbered channel causes a
MIDI Note On message to be transmitted. When the fader is lowered back to infinity, a
corresponding MIDI Note Off message is transmitted, which can be used to stop play-
back on the CD player or tape deck.
CH 1
CH 3
CH 5
CH 7
CH 9
CH 11
CH 13
CH 15
REAL TIME MSG. & MTC —This switch determines whether or not real-time mes-
sages and MTC are echoed. This is used when a device connected through the 03D
needs to be synchronized. Echoed messages include the following:
MTC Quarter Frame Message (F1h **h)
Song Position Pointer (F2h **h **h)
Song Select (F3h **)
MIDI Clock (F8h)
Start (FAh), Continue (FBh), Stop (FCh)
MTC Message (F0h 7Fh 7Fh 01h...F7h)
Operation of this echo switch depends on the HOST INTERFACE setting on the
MIDI/HOST page (MIDI/HOST Setup on page 233). When the HOST INTERFACE is
set to STANDARD I/F, this switch affects data echoed from the MIDI IN to the MIDI
OUT. When set to MULTIPORT, however, it affects data echoed from PORT 2 to the
MIDI OUT.
03D—Owner's Manual
Fader MIDI Note No.
37
38
39
40
41
42
43
44
Note On Note Off
9n 25 7f 9n 25 00
9n 26 7f 9n 26 00
9n 27 7f 9n 27 00
9n 28 7f 9n 28 00
9n 29 7f 9n 29 00
9n 2a 7f 9n 2a 00
9n 2b 7f 9n 2b 00
9n 2c 7f 9n 2c 00