Yamaha 03D Owner's Manual page 141

MONODELAY->REV
Parameter Range
DELAY 0.1–1000.0 ms
FB.DLY 0.1–1000.0 ms
FB.GAIN -99 to +99%
HI.RATIO 0.1–1.0
REV.TIME 0.3–99.0 s
INI.DLY 0.1–500.0 ms
HI.RATIO 0.1–1.0
DIFF. 0–10
DENSITY 0–100%
THRU,21 Hz–8.0
HPF
kHz
50 Hz–16.0 kHz,
LPF
THRU
REV.BAL 0–100%
AMP SIMULATE
Parameter Range
1
AMP TYPE
2
DST TYPE
N.GATE 0–20
DRIVE 0–100
MASTER 0–100
CAB DPT 0–100%
BASS 0–100
MIDDLE 0–100
TREBLE 0–100
EQ F 99 Hz–8.0 kHz
EQ G –12 to +12 dB
EQ Q 10.0–0.40
1. STK-M1, STK-M2, THRASH, MIDBOOST, CMB-PG, CMB-VR, CMB-DX, CMB-TWN,
MINIAMP, FLAT
2. DST1, DST2, OVD1, OVD2, CRN
Description
Delay time.
Feedback delay time.
Feedback amount.
High frequency portion of the feedback, expressed as a
ratio relative to FB.GAIN.
Length of reverberation.
Delay time until the early reflections of the reverb are
heard.
Length of reverberation for the high frequencies, expressed
as a ratio relative to REV.TIME.
Left/right spread of the reverb.
Density of the reverb.
Cutoff frequency of the high pass filter.
Cutoff frequency of the low pass filter.
Balance between the delay and the delayed reverb. 0 is
only delay.
Description
Select the type of amp.
Select the type of distortion.
Amount of noise gating.
Depth of distortion.
Master level control.
Amount of speaker simulation.
Low range tone control.
Mid range tone control.
High range tone control.
Frequency of the parametric equalizer.
Gain of the parametric equalizer.
Bandwidth of the parametric equalizer.
139
Effects Parameters
03D—Owner's Manual