Analog Outputs Specs - Yamaha 03D Owner's Manual

264

Analog Outputs Specs

Actual
Connection Source
Impedance
STEREO OUT
150
(L, R)
BUS OUT (1–4)
150
AUX OUT (1–4)
150
Insert Out
600
(CH1, 2)
REC OUT (L, R)
600
MONITOR OUT
150
(L, R)
Phones
100
1. STEREO OUT XLR-type connectors are balanced (pin 1 = ground, pin 2 = hot, pin 3 = cold).
2. BUS, AUX, and MONITOR OUT TRS phone jacks are balanced (tip = hot, ring = cold, sleeve = ground).
3. Input channel insert connections are unbalanced (tip = send, ring = return, sleeve = ground).
4. The PHONES stereo phone jack is unbalanced (tip = left, ring = right, sleeve = ground).
5. When dB represents a specific voltage, 0 dB is referenced to 0.775 V rms.
6. For REC OUT levels, 0 dBV is referenced to 1.00 V rms.
7. STEREO OUT and MONITOR OUT use 20-bit 8-times oversampling D/A converters.
8. BUS and AUX outputs use 18-bit 8-times oversampling D/A converters.
03D—Owner's Manual
For Use With
Nominal
Nominal
600 Lines +4 dB (1.23 V)
10 k Lines +4 dB (1.23 V)
10 k Lines +4 dB (1.23 V)
10 k Lines +4 dB (1.23 V)
10 k Lines –10 dBV (316 mV)
10 k Lines +4 dB (1.23 V)
8 phones 1 mW
40 phones 3 mW
Output Level
Maximum
Before Clipping
+18 dB (6.16 V)
+18 dB (6.16 V)
+18 dB (6.16 V)
+18 dB (6.16 V)
+4 dBV (1.58 V)
+18 dB (6.16 V)
25 mW
75 mW
Connector
XLR-3-32 type
1
(balanced)
TRS phone jack
2
(balanced)
TRS phone jack
2
(balanced)
TRS phone jack
3
(unbalanced)
Phono (unbal-
anced)
TRS phone jack
2
(balanced)
Stereo phone jack
4
(unbalanced)