Yamaha 03D Owner's Manual page 140

138
Chapter 13—Onboard Effects
DELAY+REV
Parameter
DLY L
DLY R
FB.DLY
FB.GAIN
HI.RATIO
REV.TIME
INI.DLY
HI.RATIO
DIFF.
DENSITY
HPF
LPF
REV.BAL
DELAY->REV
Parameter
DLY L
DLY R
FB.DLY
FB.GAIN
HI.RATIO
REV.TIME
INI.DLY
HI.RATIO
DIFF.
DENSITY
HPF
LPF
REV.BAL
03D—Owner's Manual
Range
0.1–1000.0 ms Delay time of the L channel.
0.1–1000.0 ms Delay time of the R channel.
0.1–1000.0 ms Feedback delay time.
–99 to +99% Feedback amount.
High frequency portion of the feedback, expressed as a
0.1–1.0
ratio relative to FB.GAIN.
0.3–99.0 s Length of reverberation.
Delay time until the early reflections of the reverb are
0.1–500.0 ms
heard.
Length of reverberation for the high frequencies, expressed
0.1–1.0
as a ratio relative to REV.TIME.
0–10 Left/right spread of the reverb.
0–100% Density of the reverb.
THRU,21 Hz–8.0
Cutoff frequency of the high pass filter.
kHz
50 Hz–16.0 kHz,
Cutoff frequency of the low pass filter.
THRU
Balance of the reverb and delay. 0 is only delay, 100 is only
0–100%
reverb.
Range
0.1–1000.0 ms Delay time of the L channel.
0.1–1000.0 ms Delay time of the R channel.
0.1–1000.0 ms Feedback delay time.
–99 to +99% Feedback amount.
High frequency portion of the feedback, expressed as a
0.1–1.0
ratio relative to FB.GAIN.
0.3–99.0 s Length of reverberation.
Delay time until the early reflections of the reverb are
0.1–500.0 ms
heard.
Length of reverberation for the high frequencies, expressed
0.1–1.0
as a ratio relative to REV.TIME.
0–10 Left/right spread of the reverb.
0–100% Density of the reverb.
THRU,21 Hz–8.0
Cutoff frequency of the high pass filter.
kHz
50 Hz–16.0 kHz,
Cutoff frequency of the low pass filter.
THRU
Balance between the delay and the delayed reverb. 0 is
0–100%
only delay.
Description
Description