CyberPower PRL1500RT2UC User Manual page 12

LCD OPERATION GUIDE (continued)
Menu / Basic Setup
In order to better supply power to the connected equipment, it is recommended to check settings in this menu before
you start using your UPS.
Item
Utility Quality
Sensitivity
Menu / Ambient Setup
The settings in this menu affect the UPS display, alarm, and noise. Customize your UPS to meet your needs.
Item
Eco Mode
LED Brightness
LCD Hibernation
Cycling Display
Default



Normal



Medium

Default


Active




Dim




After 1 minute




Never


Option
Select the voltage quality of the input utility power.
Good If Good is selected, the UPS will be more sensitive to
power quality and go to battery mode more often to
Normal
supply the cleanest power to connected devices.
Poor
If Poor is selected, the UPS will tolerate more power
fluctuations and go to battery mode less often.
"Customized" shows up when Maximum/Minimum
(Customized)
Output Voltage has been adjusted in Advanced Setup
Menu or through software.
Select the sensitivity level to power events for
connected equipment.
If the connected equipment is highly sensitive to
High
power events, select High; the UPS will go to battery
Medium
mode more often to provide the cleanest power.
Low
If the connected equipment can tolerate more power
events, select Low; the UPS will go to battery mode
less often.
Option
When Active is selected, the UPS will change
Active
related setup functions in this menu automatically
Inactive
to work under low energy consumption.
You can also set the functions in this menu
Active (Customized)
independently and then go back to Eco Mode to
Inactive
have a check. If Active is displayed, the UPS works
(Customized)
under low energy consumption.
Bright
The LED brightness can be set in accordance with
Normal the ambient lights or different usage scenario.
Dim If Only Power On is selected, all LED indicators will
be off except Power On Indicator.
Only Power On
Never
After 1 minute
After this amount of time with no activity, the
display screen will shut off to save energy.
After 5 minutes
After 10 minutes
Never
After this amount of time with no activity, UPS will
After 10 seconds
start cycling the status information on display
After 20 seconds
screen.
After 30 seconds
11
Description
Description