IMPORTANT SAFETY INSTRUCTIONS This manual contains important instructions. Please read and follow all instructions carefully during installation and operation of the unit. Read this manual thoroughly before attempting to unpack, install, or operate the UPS. CAUTION! The UPS must be connected to a grounded AC power CAUTION! When installing the equipment, ensure that the sum of the outlet with fuse or circuit breaker protection.
INSTALLING YOUR UPS SYSTEM AUTOMATIC VOLTAGE REGULATOR(AVR) The PR5000ELCDRTXL5U/ PR6000ELCDRTXL5U stabilizes damaging inconsistent utility power. Automatic Voltage Regulator automatically regulates low or high voltages to keep equipment working at safe AC power levels (220/230/240V) without switching to battery. Your equipment operates normally when power problems, such as, shout brownouts and blackouts.
UPS and alter its various programmable 16. Extended Runtime Battery Pack Connector parameters. Provides a connection for additional CyberPower XL Battery Packs 17. Ground Stud Use the Ground Stud to ground the UPS.
HARDWIRE THE INPUT/ OUTPUT TERMINALS CAUTION! To avoid electrical shock, before hardwiring the UPS (in/out power cord), turn the unit OFF and disconnect the unit from utility power. The in/out power cord MUST be grounded. CAUTION! To avoid electrical shock, turn off and unplug the unit first, then install the input/output power cord with grounded. Connect the ground wire prior to connecting the line wires! CAUTION! Do not use improper size power cord to avoid damaging your equipment and avoid fire hazards.
Attach the two rack mount ears to the UPS using the provided screws. Step 5: Carefully align the front panel connector and latches with the PR5000ELCDRTXL5U/ PR6000ELCDRTXL5U Step 3: Rack mount rail Installation Ensure rack stability prior to installing devices in the rack.
HARDWARE INSTALLATION VERTICAZL/TOWER INSTALLATION Step 1: Attach the base stands Step 2: Attach dust covers Simply slide the base stands onto the bottom of the UPS, roughly 8-10” Insert dust covers into the rack mount ear screw holes that are not being apart.
DEFINITION FOR ILLUMINATED LCD INDICATORS MULTIFUNCTION LCD READOUT The multifunction LCD readout provides ready access to power/battery condition vitals, such as: Runtime, Load, Temperature, and much more. The screen is also rotatable so the UPS can be used in either rack mount or vertical/tower orientation.
Page 9
DEFINITION FOR ILLUMINATED LCD INDICATORS TOGGLE SCREENS Input Voltage Output Voltage The Input Voltage screen displays the AC The Output Voltage screen measures, the voltage that the UPS system is receiving AC voltage that the UPS is providing to from the utility wall receptacle. This can your connected equipment via the UPS be used as a diagnostic tool to identify outlets.
4Hz/sec. Functional Description: “Slew Rate” indicates On average utility power operates 88% of the time and the CyberPower the tolerance of a device in accepting frequency variance. Lower GreenPower Technology will work in its money/ energy saving Bypass “Slew Rate”...
• properly. Contact your local government for more information about by CyberPower Systems. Use of incorrect battery type is an proper disposal and recycling of batteries. Do not dispose of batteries electrical hazard that could lead to explosion, fire, electrical shock, in a fire.