Espressif ESP32-S2 Programming Manual page 1194

Chapter 2. API Reference
CONFIG_LWIP_DHCP_STATE_DEBUG
Enable DHCP state tracking
Found in: Component config
Default value:
• No (disabled) if
CONFIG_LWIP_DHCP_DEBUG
Enable DHCP debug messages
Found in: Component config
Default value:
• No (disabled) if
CONFIG_LWIP_IP6_DEBUG
Enable IP6 debug messages
Found in: Component config
Default value:
• No (disabled) if
CONFIG_LWIP_ICMP6_DEBUG
Enable ICMP6 debug messages
Found in: Component config
Default value:
• No (disabled) if
CONFIG_LWIP_TCP_DEBUG
Enable TCP debug messages
Found in: Component config
Default value:
• No (disabled) if
CONFIG_LWIP_SNTP_DEBUG
Enable SNTP debug messages
Found in: Component config
Default value:
• No (disabled) if
mbedTLS Contains:
• CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN
• Certificate Bundle
• Certificates
• CONFIG_MBEDTLS_CHACHA20_C
• CONFIG_MBEDTLS_ECP_C
• CONFIG_MBEDTLS_CMAC_C
• CONFIG_MBEDTLS_ECDSA_DETERMINISTIC
Espressif Systems
> LWIP > CONFIG_LWIP_DEBUG
CONFIG_LWIP_DEBUG
> LWIP > CONFIG_LWIP_DEBUG
CONFIG_LWIP_DEBUG
> LWIP > CONFIG_LWIP_DEBUG
CONFIG_LWIP_DEBUG
> LWIP > CONFIG_LWIP_DEBUG
CONFIG_LWIP_DEBUG
> LWIP > CONFIG_LWIP_DEBUG
CONFIG_LWIP_DEBUG
> LWIP > CONFIG_LWIP_DEBUG
CONFIG_LWIP_DEBUG
1183
Submit Document Feedback
Release v4.4