Espressif ESP32-S2 Programming Manual page 1248

Chapter 2. API Reference
CONFIG_WPA_WPS_STRICT
Strictly validate all WPS attributes
Found in: Component config
Select this option to enable validate each WPS attribute rigorously. Disabling this add the workaorunds
with various APs. Enabling this may cause inter operability issues with some APs.
Default value:
• No (disabled)
CONFIG_WPA_11KV_SUPPORT
Enable 802.11k, 802.11v APIs handling in supplicant
Found in: Component config
Select this option to enable 802.11k 802.11v APIs(RRM and BTM support). Only APIs which are
helpful for network assisted roaming are supported for now. Enable this option with BTM and RRM
enabled in sta config to make device ready for network assisted roaming. BTM: BSS transition man-
agement enables an AP to request a station to transition to a specific AP, or to indicate to a station a
set of preferred APs. RRM: Radio measurements enable STAs to understand the radio environment,
it enables STAs to observe and gather data on radio link performance and on the radio environment.
Current implementation adds beacon report, link measurement, neighbor report.
Default value:
• No (disabled)
Contains:
• CONFIG_WPA_MBO_SUPPORT
• CONFIG_WPA_SCAN_CACHE
CONFIG_WPA_SCAN_CACHE
Keep scan results in cache
Found in: Component config
Keep scan results in cache, if not enabled, those will be flushed immediately.
Default value:
• No (disabled) if
CONFIG_WPA_MBO_SUPPORT
Enable MBO support in supplicant
Found in: Component config
Select this option to enable WiFi Multiband operation certification support.
Default value:
• No (disabled) if
Compatibility options
Contains:
• CONFIG_LEGACY_INCLUDE_COMMON_HEADERS
Espressif Systems
> Supplicant
> Supplicant
> Supplicant > CONFIG_WPA_11KV_SUPPORT
CONFIG_WPA_11KV_SUPPORT
> Supplicant > CONFIG_WPA_11KV_SUPPORT
CONFIG_WPA_11KV_SUPPORT
1237
Submit Document Feedback
Release v4.4