Sharing Screens Using Epson iProjection (Wireless Connection)
the base unit using Advanced Connection Mode of the Epson iProjection
software.
When monitoring or controlling the base unit using wireless LAN
in standby mode, connect to your computer and base unit with
infrastructure mode.
Selecting Wireless Network Settings Manually
Before you can display from your wireless network, you need to select network
settings for the base unit.
a
Press the [Menu] button, select the Network menu, and press the Enter
button.
b
Select Network Settings and press the Enter button.
c
To identify the base unit over the network, select Base Unit Name and
enter a name up to 16 alphanumeric characters long.
d
Set the Priority Control Interface setting to Wireless LAN.
e
Select the connection method.
• For simple AP mode, set the Simple AP setting to On and go to step 10.
47