Network Menu - Wired Lan Menu - Epson ELPWP20 User Manual

Base Unit Network Settings - Network Menu
Setting Options
PEAP-TLS
EAP-TLS
EAP-FAST
User name Up to 64
alphanumeric
characters
Password Up to 64
alphanumeric
characters
Client Certificate —
CA certificate —
RADIUS Server Up to 64
Name alphanumeric
characters
Description
Authentication protocol used in Windows
Server. Select this when using a client
certificate.
Authentication protocol widely used to
use a client certificate.
Select this when these authentication
protocols are used.
Enter a user name for the network.
To include a domain name, add it
before a backslash and the user name
(domain\username).
When importing a client certificate, the
name the certificate was issued to is
automatically set.
Enter a password for authentication. After
you enter the password and select Set, the
password is displayed as an asterisk (*).
Setting is only displayed when EAP Type
is set to PEAP or EAP-FAST.
Imports the client certificate.
Setting is only displayed when EAP Type
is set to PEAP-TLS or EAP-TLS.
Imports the CA certificate.
Enter the server name to verify.
Setting Options
IP Settings DHCP
IP Address
Subnet Mask
Gateway Address
IP Address Display On
Off

Network Menu - Wired LAN Menu

Settings on the Wired LAN menu let you select the wired LAN settings.
Description
Set DHCP to On if your network assigns
addresses automatically; set to Off to
manually enter the network's IP Address,
Subnet Mask, and Gateway Address
using 0 to 255 for each address field.
Do not use these addresses: 0.0.0.0,
127.x.x.x, 192.0.2.x or 224.0.0.0 through
255.255.255.255 (where x is a number
from 0 to 255) for IP Address,
255.255.255.255 or 0.0.0.0 through
254.255.255.255 for Subnet Mask, and
0.0.0.0, 127.x.x.x or 224.0.0.0 through
255.255.255.255 for Gateway Address.
Set to On to display the IP address on the
network information screen and Home
screen.
91