Pairing The Wireless Transmitter; Reasons For Pairing; Pairing Using A Base Unit - Epson ELPWP20 User Manual

Pairing the Wireless Transmitter

Before using the wireless transmitter, you may need to pair it with the receiver
(base unit or supported projector).
Caution
Do not disconnect the wireless transmitter or the power cord of the base unit
or projector while sending network information. If the power cord or wireless
transmitter is disconnected, pairing may not be performed correctly. Check that
the completion message is displayed before disconnecting the wireless transmitter.
• You need to configure the network settings for the base unit or
projector you are using before you perform pairing.
• If you are using the Wireless Presentation System (ELPWP10) with
a supported projector, see your projector User's Guide for network
settings for the projector.
Related Links
g
• "Reasons for Pairing"
p.21
• "Pairing Using a Base Unit"
p.21
• "Pairing on a Computer"
p.22
• "Pairing Using a Projector"
p.22
• "Base Unit Indicator Status"
p.105
• "Wireless Transmitter Indicator Status"

Reasons for Pairing

You need to pair the wireless transmitter with the receiver in the following
situations:
• The first time you start using the Epson Wireless Presentation System
(ELPWP10) (You are using a supported projector as a receiver)
• The first time you start using the optional wireless transmitter (ELPWT01)
• When changing the receiver being used
p.106
• When the following settings in the Network Settings have been changed after
pairing
• Base Unit Name (If you are using a base unit)
• Projector Name or Passphrase (If you are using a supported projector)
The wireless transmitter supplied with the Wireless Presentation System
(ELPWP20) is paired with the base unit at the time of shipment.

Pairing Using a Base Unit

When adding another wireless transmitter to the wireless presentation system
(ELPWP20), you can pair the wireless transmitter using your base unit.
Steps 1, 2, and 4 are not necessary if you can confirm that pairing is
complete using the wireless transmitter indicator.
a
Connect the supplied HDMI cable to your external display device's HDMI
input port.
b
Connect the other end to the base unit's HDMI Out port.
c
Press the power button on the base unit or remote control to turn on the
base unit.
The status indicator flashes blue as the base unit warms up. Once the base
unit is warmed up, the status indicator stops flashing and remains blue.
d
Turn on the connected external display device.
21