Table of Contents
Advertisement
Safety Instructions
Before using the wall mount, make sure you read all of the safety instructions below and then save this manual for later
reference. Incomplete or incorrect installation could cause damage to the product or result in personal injury or property
damage.
For additional information, see the User's Guide and Safety Instructions included with your projector.
Explanation of Symbols
The warning symbols shown below are used throughout this installation manual to prevent the possibility of personal injury or
property damage. Make sure you understand these warnings when reading this installation manual.
Warnings indicate information that, if ignored, could possibly result in personal injury or even death due to
Warning
incorrect handling.
Cautions indicate information that, if ignored, could possibly result in personal injury or physical damage due to
Caution
incorrect handling.
Symbol indicating an action that must not be done
Symbol indicating an action that should be done
Safety Precautions for Installation
The wall mount weighs approximately 10 kg (22 lbs.). To prevent injury, handle the mount carefully.
This product is meant for mounting the projector and optional accessories only. Do not attach anything heavier than the
projector and optional accessories to the product.
Doing so could cause the product to fall and cause personal injury or property damage.
Installation of the product on the wall should be performed by at least two qualified technicians using only approved
mounting equipment. Incomplete or incorrect installation could cause the product to fall and cause personal injury or
property damage. For additional help, contact the customer support office listed in the projector's User's Guide.
Make sure you follow the instructions in this guide to install the wall mount.
Otherwise, the wall mount may fall and result in personal injury or property damage.
Turn off the projector when installing the mount to avoid fire or electric shock.
Handle the power cord carefully to avoid fire or electric shock.
Observe the following precautions when handling:
• Do not handle the cord with wet hands.
• Do not use a cord that is damaged or modified.
• Do not pull the cord with too much force when routing it through the arm unit.
When installing the product, do not hold on to the cable cover to position the mount.
Doing so could cause the cable cover to detach, resulting in personal injury or property damage.
When you mount the projector on the wall with the wall mount, the wall requires enough strength to hold the projector,
optional accessories, and the wall mount. This wall mount should be installed on a concrete wall. Confirm the weight of
the projector, optional accessories, and the wall mount before installation, and maintain the strength of the wall. If the
wall is not strong enough, reinforce the wall before installation.
Do not install the product in a location where it might be exposed to vibration or shock, which could cause damage to the
product or mounting surface.
It could also cause the product to fall, resulting in personal injury or property damage.
2
Warning
Advertisement
Table of Contents
