RL78/G24 Fast Prototyping Board
5.15
External Power Supply
When the evaluation MCU is to have a desired power-supply voltage, or when more current is required, use
an external power supply. The usable voltages depend on the evaluation MCU.
Destinations for the connection of an external power supply:
VDD: pin J17-1 on the external power-supply header
•
VSS: pin J17-2 on the external power-supply header
•
Figure 5-8 shows the positions of the external power supply.
When an external power supply is used, confirm that the I/O voltages for Arduino
modules, or Grove modules are correct.
Figure 5-8 Positions of the Destinations for Connection of an External Power Supply (Top Side)
R20UT5091EJ0100 Rev. 1.00
Apr.16.23
5. User Circuits
shields, Pmod
Pin J17-1 (VDD)
Pin J17-2 (VSS)
Page 24 of 36