Data.out."/"Prnt.par." Menu - Sartorius Gold & Carat II Series Operating Instructions Manual

System Settings
Parameter Setting values
AUTO.TAR. OFF*
ON
* Factory setting
7.3.7

"DATA.OUT."/"PRNT.PAR." Menu

Parameter Setting values
ACTIVAT. MAN. NO
MAN.AFTR*
INTERV.N.
INTERV.A.
AUTO.LC
FORMAT 22CHARS*
EXTR.LIN.
PRT.INIT. OFF
ALL*
MAIN.PAR.
GLP OFF*
CAL.-ADJ.
ALWAYS
TAR./PRT. OFF*
ON
TIME 24H*
12H
DATE DD.MMM.YY*
MMM.DD.YY
YY.MM.DD
* Factory setting
22 Operating Instructions Gold&Carat II Line
Explanations
Deactivates automatic taring after data output.
The device automatically tares after data output.
Explanation
Manual without stability: The print process can be started manually at any
time.
Manual after stability: After pressing the [Print] button, the print command is
only executed once stability is achieved.
The output rate can be set from 0–9999 seconds under "INPUT/INTERV."
once stability is achieved.
The output rate can be set from 0–9999 seconds under "INPUT/INTERV."
once stability is achieved.
Automatically at load change: The print process starts after every load
change.
The printer output prints 22 characters per line (16 characters for the
measured values and 6 characters for identifiers).
The printer output prints an additional line with the date, time, and weight
value.
Deactivates the output of the application parameters.
The print command prints all parameters.
The print command only prints the main parameters.
Deactivates the GLP printout.
Activates the GLP printout for all calibration and adjustment processes.
The GLP printout is always switched on. All printouts contain a GLP header
and a GLP footer.
Deactivates automatic taring after printer output.
Automatically tares the device after every printout.
Sets the time to 24-hour mode.
— Sets the time to 12-hour mode (AM/PM).
— Is blocked for ISO format.
Sets the date display format to DD.MMM.YY.
Sets the date display format to MMM.DD.YY.
— Sets the date display format to ISO FORMAT YYYY-MM-DD.
— Sets the time to 24-hour mode.