Pre-Service Checklist - Xantrex Freedom X 1200 Owner's Manual

Pre-service Checklist

Pre-service Checklist

ELECTRICAL SHOCK HAZARD
Do not disassemble the Freedom X 1200. It does not contain any
user-serviceable parts. Attempting to service the unit yourself could
result in an electrical shock or burn.
Failure to follow these instructions can result in death, serious
injury, or equipment damage.
NOTE: To obtain service go to Contact Information on page 1.
Prior to obtaining service, see below:
1. Check for any error codes displayed on the LCD screen. If a
message is displayed, record it before doing anything
further.
2. As soon as possible, record the conditions at the time the
problem occurred so you can provide details when you
contact customer service for help. Include the following
information:
What loads the Freedom X 1200 was running or
n
attempting to run
What the battery condition was at the time (voltage,
n
etc.) if known
Recent sequence of events
n
Any known unusual AC shore power factors such as
n
low voltage, unstable generator output, etc.
84
WARNING
Whether any extreme ambient conditions existed at
n
the time (temperature, vibrations, moisture, etc.)
3. If your Freedom X 1200 is not displaying an error code,
check the following to make sure the present state of the
installation allows proper operation:
Is the inverter located in a clean, dry, adequately
n
ventilated place?
Are the battery cables adequately sized as
n
recommended in the Installation guide?
Is the battery in good condition?
n
Are all DC connections tight?
n
Are the AC input and output connections and wiring in
n
good condition?
Are the configuration settings correct for your particular
n
installation?
Are all disconnects and AC breakers closed and
n
operable?
Have any of the fuses blown in the installation?
n
4. Contact customer support for further assistance. Please be
prepared to describe details of your system installation and
to provide the model and serial number of the unit.
Freedom X 1200 Owner's Guide