Product Safety Information - Xantrex Freedom X 1200 Owner's Manual

Product Safety Information

Product Safety Information
1. Before using the inverter, read all instructions and cautionary
markings on the unit, the batteries, and all appropriate
sections of this guide.
2. Use of accessories not recommended or sold by the
manufacturer may result in a risk of fire, electric shock, or
injury to persons.
3. The inverter is designed to be connected to both DC and AC
electrical systems. The manufacturer recommends that all
wiring be done by a certified technician or electrician to
ensure adherence to the local and national electrical codes
applicable in your jurisdiction.
4. To avoid a risk of fire and electric shock, make sure that
existing wiring is in good condition and that wire is not
undersized. Do not operate the inverter with damaged or
substandard wiring.
5. Do not operate the inverter if it has been damaged in any
way.
6. This unit does not have any user-serviceable parts. Do not
disassemble the inverter except where noted for connecting
wiring and cabling. See your warranty for instructions on
obtaining service. Attempting to service the unit yourself
may result in a risk of electrical shock or fire. Internal
capacitors remain charged after all power is disconnected.
7. To reduce the risk of electrical shock, disconnect both AC
and DC power to or from the inverter before attempting any
maintenance or cleaning or working on any components
connected to the inverter. Do not disconnect under load.
6
Turning the inverter to Standby using the Power button on
the front panel will not reduce an electrical shock hazard.
8. The inverter must be provided with an equipment-grounding
conductor connected to the AC input ground.
9. Do not expose this unit to rain, snow, or liquids of any type.
This product is designed for dry-locations-use only. Damp
environments will significantly shorten the life of this product
and corrosion caused by dampness will not be covered by
the product warranty.
10. To reduce the chance of short-circuits, always use insulated
tools when installing or working with this equipment.
11. Remove personal metal items such as rings, bracelets,
necklaces, and watches when working with electrical
equipment.
12. This unit is an inverter only and is not intended for charging
batteries.
13. For marine applications, this unit must be installed with a
drip shield. Refer to Marine Installation on page 61 for
details.
Freedom X 1200 Owner's Guide