Removing The Left Side Cover - KTM 790 ADVENTURE R 2022 Owner's Manual

13.12

Removing the left side cover

–
Check the chain sliding guard for wear.
» If continuous signs of wear to the chain are visible on the
chain sliding guard in the area
–
Change the chain sliding guard.
» If the chain sliding guard is highly worn on the underside
in the marked area
–
Change the chain sliding guard.
–
Check that the chain sliding guard is firmly seated.
» If the chain sliding guard is loose:
–
Tighten screws on the chain sliding guard.
Guideline
Remaining screws,
chassis
V01265-10
Finishing work
–
Remove the rear of the motorcycle from the lifting gear.
( p. 81)
Preparatory work
–
Remove the seat. (
Main work
–
Remove left side cover from the rubber bushings in the
A
areas and
–
Pull off the left side cover sideways and remove it toward the
front.
F02032-10
SERVICE WORK ON THE CHASSIS 13
D marked:
E
:
M5
p. 82)
B
.
5 Nm (3.7 lbf ft)
87