Settings; Favorites; Favorites-Anzeige 1-4 - KTM 790 ADVENTURE 2024 Owner's Manual

7 COMBINATION INSTRUMENT

7.28.26 Settings

7.28.27 Favorites

7.28.28 Favorites‑Anzeige 1‑4
54
Info
It is not possible to change the audio volume using the
combination switch with every cellphone.
The call duration and contact are displayed. Depend-
ing on the cellphone settings, the contact is shown by
name.
Accessing contacts must be enabled on the cellphone.
An incoming call is shown in a small window at the top
of the combination instrument display when the naviga-
tion function is active.
You cannot navigate in the menu during an active
phone conversation.
Condition
• The motorcycle is stationary.
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until Settings is highlighted.
Press the SET button to open the menu.
In the Settings menu, favorites, quick selections, KTMconnect (op-
tional), and the shift warning light can be configured. Settings
can be made for units or various values. Several functions can be
enabled or disabled.
I00227-01
Condition
• The motorcycle is stationary.
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until Settings is highlighted.
–
Press the SET button to open the menu.
–
Press the UP or DOWN button until Favorites is highlighted.
Press the SET button to open the submenu.
–
Access menu item with the UP or DOWN button, and add the
selected information to the SET display using the Favorites but-
I00228-01
ton.
Up to four sets of information can be selected in
the Favorites menu.
Condition
• The motorcycle is stationary.
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until Settings is highlighted.
–
Press the SET button to open the menu.
–
Press the UP or DOWN button until Favorites is highlighted.
Press the SET button to open the menu.
–
Press the UP or DOWN button to
select Favorite 1, Favorite 2, Favorite 3, or
I00229-01
Favorite 4. Press SET button to open the menu.
–
Press the UP or DOWN button to select the desired information.
Press the SET button to confirm the selection.