Table of Contents
Advertisement
8.4
Adjusting the basic position of the clutch lever
–
Remove screws
tion the handlebar so that screws
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
Remove screws
–
Move the handlebar supports into the desired position
C
or
. Mount and tighten screws
Guideline
Mount the left and right handlebar supports in the same
position.
Screw, handle-
bar support
–
Position the handlebar.
Info
F01907-10
Make sure the cables and wiring are positioned cor-
rectly.
–
Position handlebar clamp. Mount screws
evenly.
Guideline
Screw, handlebar
clamp
–
Push clutch lever forward.
–
Adjust the basic position of the clutch lever to your hand size
by turning adjusting screw
Info
When the adjusting screw is turned clockwise, the
clutch lever moves closer to the handlebar.
When the adjusting screw is turned counterclockwise,
the clutch lever moves away from the handlebar.
The range of adjustment is limited.
I00286-11
Only turn the adjusting screw by hand, and do not use
force.
Do not make any adjustments while riding.
1
. Take off the handlebar clamps
3
are accessible.
3
. Take off handlebar supports
3
.
M10
45 Nm (33.2 lbf ft)
1
M8
20 Nm (14.8 lbf ft)
1
.
ERGONOMICS 8
2
. Posi-
4
.
B
A
,
Loctite
®
243™
and tighten
67
Advertisement
Table of Contents
