Table of Contents
Advertisement
After the judder damper
elements are renewed,
the adaptation values must be
reset with the BMW Motorrad
diagnostic system. Please con-
tact a repair shop, preferably
an authorized BMW Motorrad
dealer.
Lubricate judder damper ele-
ments 2 and install them.
Installation aid
Silicone spray
Install chain sprocket car-
rier 1.
Roll the rear wheel on the
support into the rocker until
the brake caliper carrier can
be installed.
Mount brake caliper carrier 1
in guide 2.
Make sure that the wheel
speed sensor 1 is not dam-
aged when rolling in the rear
wheel.
Roll rear wheel further into
swinging arm while simulta-
neously pushing brake caliper
carrier 1 toward front.
179
Advertisement
Chapters
Table of Contents
