BMW S 1000 XR 2023 Rider's Manual page 98

92 OPERATION
with Dynamic ESA Pro
Immediately after the button 1
is pressed, the chassis and
suspension adjustment op-
tions for damping 2 and spring
preload 3 are displayed.
The display automatically dis-
appears again after a short
time.
Adjusting damping
Turn on the ignition. (
Press button 1 briefly to
display current setting.
After actuating button 1 once
more, the following mes-
sage appears:
OE
80)
D-ESA Pro
required. Damping not
changed.
with Dynamic ESA Pro
To adjust the damping rate:
Repeatedly press button 1
briefly until the desired setting
is displayed.
The damping cannot be
adjusted while the motor-
cycle is being ridden.
The selection arrow 4 is dis-
played and goes away after the
changeover of the status.
The following settings are avail-
able:
: Damping for comfort-
Road
able road travel
: Damping for
Dynamic
dynamic road travel
If button 1 is not pressed for
a longer time, the damping is
adjusted as indicated.
OE