Table of Contents
Advertisement
Lubricant
Unirex N3
Lift the front wheel and install
the quick-release axle 1 using
an appropriate torque.
Quick-release axle in
threaded bush
M24 x 1.5
37 lb/ft (50 Nm)
Tighten axle clamping
screws 1 to the specified
torque.
Clamping bolts in sub-
frame
Tightening sequence: Tighten
the screws 6 times, alter-
nating between one and the
other each time
M8 x 35
14 lb/ft (19 Nm)
Put the brake calipers on the
left and right onto the brake
disks.
Install the holding clip 2 with
the left and right mounting
bolts 4 and tighten these to
the specified torque.
175
Advertisement
Chapters
Table of Contents
