ASD FieldSpec 3 User Manual page 51

www.asdi.com
Figure 6-6
Step 6
Note:
Figure 6-7
ASD.Document 600540 Rev. C
Chapter 6 Transporting and Carrying the FieldSpec® 3
Placing the Ergonomic Pro-Pack with FieldSpec spectroradiometer and
instrument controller into the shipping case.
Place the Ergonomic Pro-Pack with spectroradiometer and instrument
controller into the shipping case using the handle straps at the top and the hip
belt at the bottom of the pack, as is shown in
There is only one orientation for placing the Ergonomic Pro-Pack into the
shipping case. The shipping case has cut-outs intended for the fiber optic
cable in the floor and the lid. Therefore, the FieldSpec spectroradiometer can
be oriented in the Ergonomic Pro-Pack with the fiber optic cable on either
side. We recommend following these instructions which puts the fiber optic
cable on top when placed in the case.
Shipping case with Ergonomic Pro-Pack with FieldSpec spectroradiometer
and instrument controller.
43
Figure 6-6.
FieldSpec® 3 User Manual