ASD FieldSpec 3 User Manual page 48

www.asdi.com
Figure 6-1
Step 1
WARNING!
Step 2
Note:
ASD.Document 600540 Rev. C
Chapter 6 Transporting and Carrying the FieldSpec® 3
The FieldSpec spectroradiometer in the Ergonomic Pro-Pack with cable
loosely coiled in the netting.
Coil the fiber optic cable loosely and place in the netting on top of the
FieldSpec spectroradiometer, as is shown in
Do not leave the fiber optic cable in the external spool that attaches to the
outside of the Ergonomic Pro-Pack or the battery pouches on the belt.
The fiber cable should never be stored with a bend of less
than a 5" diameter for long periods of time, because the
cable can be damaged with undetectable longitudinal
fractures that can cause light leakage and weaker signals.
Place the spectroradiometer into the Ergonomic Pro-Pack with the plastic
end-caps towards the top and bottom of the pack.
The spectroradiometer can be oriented in the Ergonomic Pro-Pack with the
fiber optic cable either to the right or left. Cut-outs in the shipping case lid and
floor provide room for the fiber optic cable for either orientation.
When facing the outside of the pack, we recommend putting the fiber optic
cable on the left (as shown in
when placed into the shipping case.
40
Figure 6-1.
Figure 6-1), because this puts the cable on top
FieldSpec® 3 User Manual