Ecostrad Artis iQ Instruction Manual page 6

Warning
Some parts of this product can become very hot and cause burns.
Do not touch the surface when in operation. Do not install close to
curtains or other combustible materials. Particular attention should be
given where children and vulnerable adults are present.
• Keep the power cable away from all hot parts of the appliance.
• Do not use the heater with the power cable wound up. This can cause a
dangerous build up of heat. Do not wind the cable around the appliance as this
may cause weakening and splitting of the insulation. The power cable should be
fully unwound and removed from any storage areas before use.
• Do not use the device if you detect damage to the mains plug or power cable. If
the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons to avoid a hazard.
• All repairs and servicing must be carried out by a qualified person. To avoid
danger any repairs must be completed by the manufacturer, a service agent of
the manufacturer or a similarly qualified person.
• Make sure that the voltage indicated on the rating plate for this appliance
corresponds to your power outlet.
• Check for transportation damage and make sure all parts are complete after the
appliance is unpacked. Do not use if any parts are missing or damaged.
• Do not connect the product to the power supply until fully assembled and
adjusted.
• It is recommended to plug the device directly into a wall socket. Use of extension
leads is not recommended because many models do not support high-powered
appliances. Make sure any extension lead used can safely support the power
requirements of the product.
• The power cable should not be positioned under the carpet or items of furniture.
Do not run the cable where it will be a trip hazard.
• Do not use this device in the immediate surroundings of a bath, shower,
swimming pool or any other water container. Risk of electric shock. This
product is not suitable for bathroom use.
• The device must be placed where the switches and controllers cannot be touched
by a person in a bathtub or shower.
• Do not use the device with wet or damp hands.
• No part of the appliance should be submersed in any type of liquid.
• Cleaning should be carried out using a damp cloth only. No abrasive chemicals
or materials should be used.
• Never insert fingers or other objects or body parts into the device. Risk of
electric shock or injury.
• The device must not be located immediately below an electrical socket
outlet.
Ecostrad_Artis_iQ_User_Guide_V1.1.1_03072023 4