Table of Contents
Advertisement
4-6-4 | Temperature compensation
The final setting, setting 6, controls temperature
compensation. This feature allows you to correct for unusual
environmental factors that may be skewing the room
temperature reading, such as draughts or hot pipes.
Temperature compensation can be set between - 5 °C and
+5 °C. For example, if your room temperature is 20 °C but
the heater is reading it as 18 °C, set temperature
compensation to +2 °C.
1. Use
and
to choose your compensation value between -5 and 5.
2. Press
to confirm and exit the settings menu.
4-7 | Factory reset
To reset the heater back to factory defaults (including erasing the program and
breaking the WiFi connection) press and hold the standby key
for at least 10
seconds. The screen will beep and flash all icons momentarily.
The settings will then be reset and the heater will start in manual mode.
Ecostrad_Artis_iQ_User_Guide_V1.1.1_03072023
11
Advertisement
Table of Contents
