Procedure For Removing Disc From Faulty Dz-Mv350E; Item To Be Checked; How To Remove Disc - Hitachi DZMV380EAU Service Manual

Troubleshooting > Procedure for Removing Disc from Faulty DZ-MV380E
4-8 Procedure for Removing Disc from Faulty DZ-MV380E
Information:
DZ-MV380E has an accessory shoe equipped with the power/control terminal, and the shape and
removal of accessory shoe are different from those for DZ-MV350E.

4-8-1 Item to be checked

Connect the AC adapter/charger or charged battery pack, making sure the ACCESS/PC indicator
turns off (after the disc rotation stops and the sound showing that the disc lock has been released is
heard), and then press the DISC EJECT button again.
Even with normal product, the disc cannot be removed while the ACCESS/PC indicator is lit or
blinking.
Information:
Connect the charged battery pack or the AC adapter/charger (power supply) before pressing the
DISC EJECT button.
With conventional DVD video camera/recorders, the DISC EJECT button will work even when no
power supply is connected. However, with the DZ-MV380E, the DISC EJECT button will not work
without a power supply connected.
Prohibition
After the above check, disconnect the AC adapter/charger of battery from the DZ-MV380E.
The DZ-MV380E has a built-in laser emitter block. Do not look into it: If Laser beam strikes your
eye, it could cause serious damage.

4-8-2 How to remove disc

If the disc cannot be ejected after performing "4-8-1 Item to be checked", remove it using the
procedure in this section.
Information:
Numbers in figures are step numbers of setting procedure, and letters in brackets [ ] show the
types of screw.
4 - 35