Table of Contents
Advertisement
Disassembly and Reassembly > Disassembly
(4) Front Block, FAF Circuit Board, and R Block (Fig. 5-3-5)
1) Open the jack cover (d ), and then remove screw [C] beside the jack.
2) Remove screw [D] from the bottom of front block (a).
3) Remove the front block from R block (c) in the direction of the arrow: Be careful not to damage
the FAF circuit board (b) between front block and R block.
4) Disconnect the FAF circuit board between front block and R block. The FAF circuit board is a
film-like board: Do not bend or fold it.
(a) Front Block
(b) FAF Circuit Board
(c) R Block
(d) Jack Cover
1 [C]
(c)
(a)
3
PATTERN No.
PRINTED SIDE
(d)
2 [D]
Fig. 5-3-5 Front Block, FAF Circuit Board, and R Block
4
(b)
5 - 5
[C] M1.7×4 (Silver)
[D] M1.6×2.5 (Black)
Advertisement
Table of Contents
