Table of Contents
Advertisement
Disassembly and Reassembly > Disassembly
(10) SHE Circuit Board, Accessory Shoe, and EVF Unit (Fig. 5-3-12)
SHE Circuit Board (a) and Accessory Shoe (b)
1) Disconnect the SHE circuit board from AEL circuit board (d) in the direction of the arrow.
2) Disconnect the two flat cables from SHE circuit board.
3) Remove screw [G].
4) Remove two screws [K], and then remove the accessory shoe assembled with SHE circuit board
from the R block.
5) Disconnect the SHE circuit board from accessory shoe in the direction of the arrow.
EVF Unit (c)
6) Remove the EVF unit form the R block (e) in the direction of the arrow.
Note:
1) Take care when handling the EVF unit: The EVF unit contains the LCD panel and backlight,
which are precision components. Subjecting the EVF unit to impact could result in a fault.
2) Do not disassemble the EVF unit: Doing so will cause a fault. Components in EVF unit are not
assigned as service parts.
(a) SHE Circuit Board
(b) Accessory Shoe
(c) EVF Unit
(d) AEL Circuit Board
(e) R Block
[G] M1.7×3 (Gold)
[K] M1.6×2 (Gold)
Fig. 5-3-12 SHE Circuit Board, Accessory Shoe, and EVF Unit
4 [K]
5
5
4 [K]
(e)
(d)
5 - 10
(b)
6
(c)
5
(a)
3 [G]
2
1
1
Advertisement
Table of Contents
