Procedure For Removing Dvd From Faulty Dvd Video Camera/Recorder; Items To Be Checked; How To Remove Dvd - Hitachi DZ-HS303A Service Manual

Troubleshooting > Procedure for Removing DVD from Faulty DVD Video Camera/Recorder
4-6 Procedure for Removing DVD from Faulty DVD Video
Camera/Recorder

4-6-1 Items to be checked

Connect the AC adapter/charger or battery (power supply) to the DVD video camera/recorder, and set
the power switch to "DVD" or "OFF": Make sure that the ACCESS indicator turns off, and then press
the DISC EJECT button.
Even with a normal product, the DVD cannot be removed while the ACCESS indicator is lit or
blinking. Also, when the power switch is set to "HDD" or "SD", a DVD cannot be removed.
Information:
Be sure to connect the AC adapter/charger or charged battery pack (power supply) before pressing
the DISC EJECT button.
The DISC EJECT button will not work unless a power supply is connected.

4-6-2 How to remove DVD

If the DVD cannot be removed after performing "4-6-1 Items to be checked", remove it using the
procedure in this section.
Cautions
Laser light striking the eye may cause your eyesight to be lost: For safety, be sure to remove any power
supply (AC adapter/charger, battery, etc.) from the DVD video camera/recorder before starting work.
Information:
Numbers in the procedural diagram are step
numbers of procedure, and letters in brackets
[ ] show the types of screw.
1) Remove screw [A].
2) Remove the top cover (a) in the direction of
the arrow.
3) Use a fi ne-tipped fl at-bladed screwdriver, etc.
to move the lock slider (b) in the direction of
the arrow, and then open the disc cover.
4) After removing the DVD, close the DVD cover.
When reassembling the removed parts, use
the reverse procedure to removal.
(a) Top cover
(b) Lock slider
(c) Top plate (accessory shoe)
1) [A]
(a)
Fig. 4-6-1 How to remove DVD
4 - 39
(b)
3)
(c)
2)
[A] M1.7x4(Silver)