Adjustment Procedure - Hitachi DZMV380EAU Service Manual

Adjustment > Adjustment Procedure

6-4 Adjustment Procedure

Start the adjustment program referring to "6-2-6 Starting and Terminating Adjustment Program".
For the subsequent operation, operate the PC mouse while watching the PC monitor screen.
Information:
1) Display ×××× on subsequent PC screen shows the model name.
2) The numbers on PC screens show the operational procedure.
6-4-1 Data Initialize
Note:
Perform "Data Initialize" only after replacing the MAN circuit board. Executing "Data Initialize" will
initialize all adjustment data in EEPROM. After "Data Initialize", be sure to perform all adjustment
items.
Procedure:
1) Check DATA INITIALIZE on the ADJUST MENU
screen.
2) Click the EXECUTE button on ADJUST MENU screen,
and then proceed with START TO SEND DATA? dialog.
3) Click the OK button in START TO SEND DATA? dialog:
After several seconds, "Data Initialize" will finish and
the ADJUST MENU screen will be restored. After that,
be sure to perform all adjustment items.
ADJUST MENU screen
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
MODEL NAME:
ADJUST MENU
PLEASE SELECT ADJUST
START TO SEND DATA? dialog
DATA INITIALIZE
START TO SEND DATA?
OK
3
6 - 21
××××
1
DATA INITIALIZE
VIDEO LEVEL
BURST LEVEL
SAMPLING PULSE
AUTO FUCUS
AUTO IRIS CONTROL
MATRIX
CHROMA GAIN
STABILIZER
SPOT NOISE
LCD
EVF
2
EXECUTE RETURN
CANCEL