Operation - Cuisinart Smart Stick HB-400PC Instruction And Recipe Booklet

to lock into place. You will feel and hear a slight click. Make sure
the lid is locked into place.
3. Place the motor body housing on top of the food processor
bowl lid and lock into place by pressing down on the motor
body housing (Fig. 3). You will feel and hear a slight click,
which means the unit is ready for operation.
4. Plug the power cord of the hand blender into an electrical outlet.
5. To remove the motor body housing from the work bowl lid,
press the release button on the back of the motor body housing
and pull up at the same time.

OPERATION

1. Press and hold
the Unlock/On
Button below the
Variable Speed
Control Button
There is no need to hold down the Unlock/On Button during variable
speed blending.
BLENDING
The specially designed blade is for mixing and puréeing all kinds of
foods, including salad dressings, powdered drink products, soups,
sauces, and blended drinks like milkshakes or smoothies.
This blade mixes and stirs while adding only a minimum of air.
A gentle up-and-down motion is all you need to create smooth purées
for soups, dressings, sauces, and more. Be careful never to remove
the blending shaft from the liquid while in operation.
1. Connect the blending shaft to the motor body housing.
2. Plug electrical cord into a wall socket.
3. Immerse the blade end of blending shaft into mixture to be
blended. You can blend in the 3-cup beaker or a bowl, pot,
saucepan, or pitcher.
4. To turn the blender on:
2. Then press and hold
the Variable Speed
Control Button to
power up the unit.
.
You may continue to
hold the Unlock/On
Button for continuous
operation without
interruption.
3. The Variable Speed
8
Control Button is
pressure sensitive.
Press the button in
for a faster speed
and decrease pressure
for a slower speed.