Assembly - Cuisinart Smart Stick HB-400PC Instruction And Recipe Booklet

ASSEMBLY

BLENDING ATTACHMENT
Align the motor body housing with the blending shaft, and push the
pieces together until you hear and feel them click and connect. If they
don't easily connect, just pull the housing and blending shaft slightly
apart, rotate the shaft a little, push the pieces together again, and
listen for the click.
CHEF'S WHISK ATTACHMENT
1. Align the end of the whisk (A)
with the small opening of the whisk
gearbox (B).
2. Push end into opening until it locks into
position (C).
3. Align the motor body with the whisk
assembly, and push the gearbox and motor
body together until you hear and feel them
click and connect. If they don't easily
connect, just pull the housing and blending
shaft slightly apart, rotate the shaft a little,
push the pieces together again, and listen
for the click.
FOOD PROCESSOR ATTACHMENT
1. If using the chopping/mixing blade, place in the center of
the work bowl over the metal blade shaft. If using the slicing/
shredding disc, place the stem in center of work bowl, over
the metal blade shaft (Fig. 1). Place the disc over the stem with
the desired side facing up.
Note: Chopping/mixing blade should not be used with slicing/
shredding disc.
2. Place the food processor lid onto the work bowl (Fig 2.). Align the
chopping/mixing blade or the slicing/shredding disc stem with
the bottom of the food processor lid and turn the lid clockwise
Fig. 1 Fig. 2
7
A
B
Fig. 3
C