Advertisement
4.
Plug the power cord of the hand blender into an electrical outlet.
5.
To remove the motor body housing from the work bowl lid,
press the release button on the back of the motor body housing
and pull at the same time.
OPERATION
Note: There is no need to hold down the Unlock/On button during
variable speed blending.
1. Press and hold
the Unlock/On
Button below the
variable speed
control button
BLENDING
The specially designed blade is for mixing and puréeing all kinds of
foods, including salad dressings, powdered drink products, soups,
sauces, and blended drinks like milkshakes or smoothies.
This blade mixes and stirs while adding only a minimum of air to your
mixture. A gentle up-and-down motion is all you need to make the
most flavourful, full-bodied recipes. Be careful never to remove the
blending shaft from the liquid while in operation.
1.
Connect the blending shaft to the motor body housing.
2.
Plug electrical cord into a wall socket.
3.
Immerse the blade end of blending shaft into mixture to be
blended. You can blend in the 700ml beaker, a bowl, pot or
saucepan.
4.
To turn the blender on:
See Operation Illustrations 1, 2, and 3 above.
1. Press and hold the Unlock/On button.
2. Then press and hold
the variable speed
control button to
power up the unit.
.
You may continue to
hold the Unlock/On
button for continuous
operation without
interruption.
3. The variable speed
control button is pressure
sensitive. Press the button
in for a faster speed and
decrease pressure for a
slower speed.
8
Advertisement
